Hydrauli̇c Ki̇t - Products | Chiller Su Soğutma Sistemleri

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us
- Email to CEO
- Would you like to be our supplier?

Eraco Chiller

Hydraulic Kit

Developed for Processes with Long Installation Distances

It is developed for processes with multiple rotations (with elbows) and long installation distances, where water is required to circulate in a continuous closed loop. Since there are no sections open to the atmosphere in the system, water evaporation rate is close to zero. The pump is specially selected in these hydraulic modules designed according to the desired pressure. Once pressurized, the system performs the same water cycle throughout its working lifetime (provided that there is no loss-leakage). In projects where this type of hydraulic kits are used, additional equipment such as air vent and expansion tank are needed at certain points on the installation