Plastıc Coolıng - What Do We Do ? | Chiller Su Soğutma Sistemleri

Homepage
Corporate
Products
- ARA SERIES - MEA SERIES - LTA SERIES - DCA SERIES - DMA SERIES - STA SERIES - LSR SERIES
  
  There is a capacity range from 3.5 kW to 1970 kW according to your needs.
- ENE-S SERIES, ENE-D SERIES
  
  There is a capacity range from 194 kW to 1830 kW according to your needs.
- Provides Precise Temperature Control on Plastic Extruder Film Surface ERACO Film Inflation Cooler ER.IC series devices are produced to provide precise temperature control on the plastic extruder film surface. Thanks to the series with a film cooling capacity between 100 kg/h and 450 kg/h per hour, up to 30% increase in film production is achieved.
  
  Increase in movie quality
  Up to 30% increase in film production
  Increase in film transparency and gloss
- It acts as a distributor in cooling the mold. It is used to open and close the cooling circuits. Flow rate is compatible with measurement principles. With the level indicator cone, the desired flow rate can be adjusted for each chamber.
  
  Cycle/flow rate: 0/10 lt/min
  Mold connection: 12 mm brass socket suitable for 3/8” or ½” hoses
  Water inlet-outlet size: ¾”
- HEA-S/T SERIES - HEA-HPS SERIES - RCA SERIES
  
  There is a capacity range from 9 kW to 1700 kW according to your needs.
- HEW SERIES - RCW SERIES
  
  There is a capacity range from 61kW to 2148kW according to your needs.
- KSI SERIES
  
  There is a capacity range of 6kW – 32kW.
R&D
Technical Service
Articles
Contact Us

Eraco Chiller

PLASTIC COOLING

<p>Plastic is widely used in many areas of our lives. Plastic is used almost everywhere, from automotive to white goods, from kitchen and garden goods to medical applications.</p><p>In processing of plastic materials, various production techniques such as Injection and Extrusion techniques, Blow Molding, Thermoforming, Recycling are used. The common point of all of them is the need for chillers and other cooling products to cool the melted or soft plastic. Right for both quality in production and a fast and efficient process</p>

Plastic is widely used in many areas of our lives. Plastic is used almost everywhere, from automotive to white goods, from kitchen and garden goods to medical applications.

In processing of plastic materials, various production techniques such as Injection and Extrusion techniques, Blow Molding, Thermoforming, Recycling are used. The common point of all of them is the need for chillers and other cooling products to cool the melted or soft plastic. Right for both quality in production and a fast and efficient process