Dry & Wet Coolers


ER.FCF Flat Type Dry-Coolers

Flat Type Dry-Coolers

Free Coolers ( Dry Coolers ) are used to cool down the cycling fluid by the ambient air condition. High performance Free Coolers are manufactured with copper tubes and corrugated aluminum fins which improve heat transfer coefficient and they are available for vertical and horizontal airflow. Being manufacturing with 1/2″ or 5/8” copper tubes, Flat type Dry-Coolers are available with a capacity range of 88 kW to 1175 kW; also available to produce in special design and different conditions.

Free Coolers has a suitable structure for parallel connection; thus the cooling plants could be comfortably increased by connecting capacity using with ER.FCF series Free Coolers.

* Flat type design.
* Structures are galvanized steel painted with polyester based electrostatically powder; to avoid corrosion and UV ray effect.
* Each two fans are separated by internal baffle plates from other each chamber to avoid energy loss causing by reverse fan rotation.
* Each fan chamber has own maintenance covers.
* Tested at 20 bar pressure.
* Suitable for outdoor installation; motor protection IP 54.
* Suitable to work up to +60°C ambient temperature.
* Guaranteed to long-lasting life due to high corrosion resistant materials.
* Totally closed loop circuits prevent fouling and calcification.
* Automatic air and water discharge valve ( standard ).
* Microprocessor controls the fan rotation in terms of stepwise control according to the ambient temperature and set water temperature.
* Automatic water mistspraying systems provide adiabatic cooling affect which allows pulverizing the water on to the fresh air before entering to heat exchanger. System decreases the entering air temperature adducted to the wet bulb temperature.
* Units are equipped with error codes and visually alarm system leading by microprocessor.

    • RC

      | Remote control panel

    • AV

      | Audible and Visual alarm

    • SHR

      | Serial heat recovery

    • PHR

      | Parallel heat recovery

    • FIC

      | Fan speed control ( VFD inverter control )

    • CIC

      | Compressor inverter control

    • SFV

      | Special frequency and voltage design ( 460V – 60 Hz )

    • BP

      | Manual or automatic by-pass

    • AWF

      | Automatic water filling kit

    • RS-485

      | Serial communication based on RS-485 Modbus protocol

    • IND-Screen

      | IND-Screen communication and remote control via web bases.

    • WP

      | Stand-by water pump

    • RAL

      | Special RAL Code painting

    • EEV

      | Electronic expansion valve

    • AF

      | Anti-Freeze kit

    • EH

      | Evaporator heater

    • SS

      | Soft starter

    • ABS

      | Rubber shock absorber

    • LN

      | Low noise dB(A) level

    • CC-0

      | Condensing control for 0°C ambient temperature.

    • CC-20

      | Condensing control for -20°C ambient temperature.

    • CF

      | Centrifugal fan

  • About

    ERACO company countinue to embrace “Integrity & Trustworthiness” since established. We encouroge expertise, creativity and initiative of the workers and keep at the forefront of institutional excellence. We believe our business internally as family and not just a company. More

    Location

    Contact

    • Factory Address: Ferizli OSB 2.cadde No:14/1 Ferizli/Sakarya/TURKEY

    • Tel: +90 (264) 502 41 10 - 11

    • Sales Ofice Address: Atatürk Bulvarı İkitelli OSB Deposite Ofis, No:408 Başakşehir/İstanbul/TURKEY

    • Tel: +90 (212) 642 70 42

    • Email: info@eracochillers.com

    Follow Us

    • Monday - Friday 8am to 6pm

    • Saturday - 8am to 1pm

    • Sunday - Closed